Finite Elements Coupled to Electrical Circuit Equations in the Simulation of Switched Reluctance Drives: Attention to Mechanical Behaviour

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Besides, we evaluated the inuence of the mechan- ical parameters of our model namely Poisson's ratio and Young modulus. We showed that in principle Young modulus can be

We have proposed a novel experiment to measure the interaction between an atom and a macroscopic surface at short distances based on the existing technology of optical lattice

An original pure bending machine has been built to perform pure bending tests on specimens cut in thin sheets that can be used to identify elasto-plastic models taking into

We provide alternative conditions to guarantee unicity in the solution of the identification procedure for the class of switched linear systems.. Batch identification

The most accurate method to compute the equivalent magnetic forces on the mechanical mesh requires two nu- merical operations: first the magnetic force density must be computed,

Studying the impact of internal and external forces minimization in a motion-based external forces and moments prediction method: application to

13, the flux calculated by integrating the induced voltage as in (8) is compared with the flux obtained with the previous numeric method which compensates the current ripple.