• Aucun résultat trouvé

Antifouling pseudo-zwitterionic poly(vinylidene fluoride) membranes with efficient mixed-charge surface grafting via glow dielectric barrier discharge plasma-induced copolymerization

N/A
N/A
Protected

Academic year: 2021

Partager "Antifouling pseudo-zwitterionic poly(vinylidene fluoride) membranes with efficient mixed-charge surface grafting via glow dielectric barrier discharge plasma-induced copolymerization"

Copied!
14
0
0

Texte intégral

Loading

Figure

Fig. 1. Scheme of research concept of this investigation. Virgin PVDF membranes are coated with TMA and SA monomers, before undergoing plasma polymerization
Fig. 4. FT-IR analysis of virgin and surface-modified membranes.
Fig. 5. XPS analysis of virgin and surface-modified membranes.
Fig. 7. Effect of surface modification of PVDF membranes and surface charge-bias on resistance to nanofouling by BSA and lysozyme proteins.
+4

Références

Documents relatifs

2014 Spatially resolved spectroscopic diagnostics such as plasma-induced emission, laser-induced fluorescence and laser optogalvanic spectroscopy are used to

c-axis is found to be twice the period in a-form. The results indicate a phase transition to a new oriented form designated as a’. The doubling of the c period. can

+ ) metastables ( N 2 (A) ) produced by an atmospheric- pressure surface dielectric barrier discharge driven in the amplitude-modulated AC regime was investigated by combining

Furthermore, the produced electric wind presents a significantly lower induced velocity and fluctuating amplitude than the ones generate by burst modulation and usual unmodulated

In this paper, the pseudo-spark discharge (PSD) is applied to the source for a high current glow plasma jet.. To accelerate the plasma, the diameter of the anode hole is enlarged

The aim of the present work is (i) to study experimentally the electrical current, the specific deposited energy, the electron density and the electron temperature in the

L. ON THE DISTRIBUTION FUNCTION OF SURFACE CHARGE DENSITY WITH RE- SPECT TO SURFACE CURVATURE.. A supplemntary elucidation is given in this paper t o explain why this

Ainsi, dans cette partie de simulation on va seulement traiter le cas d’un court-circuit triphasé la durée est de 0,08s, de 0,08s à 0,16s dans la barre 3 avec une source