• Aucun résultat trouvé

Stamping of high performance thermoplastic composite intrusion beams

N/A
N/A
Protected

Academic year: 2021

Partager "Stamping of high performance thermoplastic composite intrusion beams"

Copied!
10
0
0

Texte intégral

Loading

Figure

Table 1 shows the fibre content, density, thickness and the melting temperature of these composites, as  determined by differential scanning calorimetry (DSC)
Table 2. Stacking sequences investigated for flexural tests on coupons.
Figure 3. (a)  Flexural test on stamped composite intrusion beam, (b) schematic representation of   experimental set-up and (c) cross-section of composite intrusion beam at mid-span
Figure  7.  Failure  of  GF/PP  composite  with  0/90  lay-up. 020004000600080001000012000140001600018000010203040506070Load (N)Displacement (mm) GF/PP - (0/90)GF/PP - (±45)GF/PP - (QI)010002000300040005000600070008000900010000 0 10 20 30 40 50 60 70Load (
+4

Références

Documents relatifs

Mouvement qu’a le mérite de restituer l’analyste grâce au recours à une approche textuelle immanente doublée d’une perspective qui tient compte des contextes

These polarization tests showed that as soon as the MFC external resis- tance is increased to its optimal value, the power output increases to values comparable to those of MFC-1

So, proposing a teaching device which searches to improve the learning of duality, asks to sit solid bases of linear algebra, and to devote specific attention

c) Factors controlling hematopoiesis ... Genetic interaction between Drosophila melanogaster and Leptopilina boulardi ... Fly resistance ... Parasitoid virulence factors ...

The depth map compression technique described in [3] is composed of two different parts: a lossless coding technique that uses elastic curves as inter-frame predictor is used for

Voici la répartition des arbres d'une forêt, suivant leurs qualités et leurs diamètres (en cm). A l'intersection de la ligne i et de la colonne j, on reporte le nombre

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Cette étude a permis de dresser le profil idéal d’un professionnel de laboratoire en Haïti… Comme compétences techniques, il faut en moyenne 3 à 4