Recombination of vesicles during freeze-drying
Texte intégral
Figure
Documents relatifs
In the present work, the 3D COMSOL model previously developed by our group was used to predict the impact of several factors on the variability of heat transfer between edge
The contribution of this paper is therefore to provide a model predictive control (MPC) framework, as applied in [9], to minimize under constraints the drying
Image Segmentation and 3D reconstruction for improved prediction of the sublimation rate during freeze drying Luigi Carlo Capozzi, Andrea Arsiccio, Amelia Carolina Sparavigna,
Attempts to freeze a gel (1204; -18OC) without exchanging the solvent showed that EtOH-enriched liquid was entrapped inside the frozen gel. During freeze drying at low pressure
Abstract - In order to preserve the textural properties of a wet gel one possibility is to evacuate the solvent under hypercritical temperature conditions (high temperature
On the basis of the prelimina ry experiment results, the orthogonal experiment was conducted with pulse strength, pulse duration and pulse number as the independent variables,
A travers l’analyse de la mise en œuvre du Schéma d’action sociale de proximité ressort le fait qu’il n’y a pas une stratégie unique de conduite du changement,
Further tests under various conditions and with the help of additional techniques (MRI, ESEM, Microtomography) for measuring the drying rate and local characteristics