Photowritable Silver-Containing Phosphate Glass Ribbon Fibers
Texte intégral
Figure
Documents relatifs
As seen previously, both the additions of metakaolin ( 0.8 M and 1 M) and of reinforcement elements increase the viscosity.. 12 In the end, the viscosity of the reactive
The failure modes were observed using an optical microscope, and the results show that the carbon/epoxy composite laminate had the highest mechanical strength and modulus and the
In this paper, we present a general approach for automatic detection and classification of damage mechanisms in composite materials. To show the effectiveness of this approach, a
Mainly three of these parameters have the most dominating influence on properties and structure of glass fibers: cooling rate and nozzle tem- perature (thermal influence) and
The paper addresses the creation of circular optical properties from a femtosecond laser light beam with a linear polarization in an achiral material (glass) under an
Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland *Correspondence: Valérie Desauziers valerie.desauziers@mines-ales.fr Specialty section: This article
Under Glass Weathering of Hemp Fibers Reinforced Polypropylene Biocomposites: Degradation Mechanisms Based on Emitted Volatile Organic Compounds...
If the beam is sufficiently small to probe a single orientation (case 1 or 2 in figure 12 (a)), the corresponding pattern will simply appear to have tilted with respect