• Aucun résultat trouvé

Beam tuning and stabilization using beam phase measurement at GANIL

N/A
N/A
Protected

Academic year: 2021

Partager "Beam tuning and stabilization using beam phase measurement at GANIL"

Copied!
6
0
0

Texte intégral

Loading

Figure

Fig. 3 shows, in a very simplified way, the diffe- diffe-rent actions accomplished when an user task (here  ISOGRO) operates an absolute measurement
Fig. 5. Beam central phases measured during the isochxo- isochxo-nization process : 95 MeV/A oxygen beam in SSC2 :
Fig. 7. a} loop i and 3 devices block-diagram  b) signal processing unit

Références

Documents relatifs

The high resolution of the LHCb vertex detector makes it possible to perform precise mea- surements of the vertex positions of beam-gas and beam-beam interactions.. With these

Abstract - A hybrid, vanadium-permendrirlrare-earth-cobalt (REC) wiggler has been designed, built, and measured at the Lawrence Berkeley Laboratory (LBL) as a joint project

The delays in producing the Target Tracker signal including the scintillator response, the propagation of the signals in the WLS fibres, the transit time of the photomultiplier

2 Hyperon beam and experimental apparatus The hyperon beam wasderived from an external proton beam of the CERN-SPS, hitting a hyperon production tar- get placed 16m upstream of

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

The operators can use these beam diagnostics : - either one by one by selecting what they want with a touch-panel, then by using buttons and shaft encoders to control it and

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

The Final Focus Test Beam (FFTB) is a prototype linear collider final focus, designed to reduce the 46.6 GeV SLAC beam to a size of 2 microns by 60 nanometers.. The FFTB has