Isolating strain and curvature effects in premixed flame/vortex interactions
Texte intégral
Figure
Documents relatifs
The task group recognized that under fire test conditions, large quantities of smoke may be produced but concluded that the smoke pro- duced by electrical cables in
To target a customer u with relevant recommendations we need to measure the utility of a product i with respect to a customer u that has not already bought i, we note this
Access and use of this website and the material on it are subject to the Terms and Conditions set forth at Economic approaches to measuring construction productivity in
Effects of preheating on stabilization and stability limits of a non-premixed methane jet flame have been studied for six initial reactant temperatures up to 850 K, for a coflow
(2006) investigated total lead release in the presence of free chlorine and chloramine residuals in drinking waters produced from ground, surface, desalinated, and blended
The improvement in the mechanical properties of TLCP nanocomposites resulted from the enhanced interfacial adhesion between modified CNT and TLCP as well as uniform dispersion
The present numerical exploratory approach finds that crest-type solutions of (1) have intriguing – though as yet unexplained – relationships with known polynomials; this
Supposing that the minimum value of the measured flame velocity is close to the funda- mental self-turbulent flame speed, the experimental results were compared to a simple