• Aucun résultat trouvé

Adaptive support vector machine-based surface quality evaluation and temperature monitoring. Application to billet continuous casting process Laib

N/A
N/A
Protected

Academic year: 2021

Partager "Adaptive support vector machine-based surface quality evaluation and temperature monitoring. Application to billet continuous casting process Laib"

Copied!
1
0
0

Texte intégral

(1)

Adaptive support vector machine-based surface quality evaluation and temperature monitoring.

Application to billet continuous casting process

Laibdit Leksir Yazid & Bouhouche Salah & Boucherit Med Seghir & Bast Jurgen

Abstract

A method for surface quality evaluation and temperature monitoring of the billet in continuous casting is considered in this paper. This method uses the difference between the measured and the filtered temperature computed using an adaptive support vector machine method. The temperature field, measured by an infrared camera, is affected by an important noise called calamine (a metal oxide generated during the cooling process). The quality of the billet’s surface temperature is connected to the secondary cooling behavior, and therefore an evaluation of the calamine effect is needed. Methods such as soft sensing and adaptive support vector machine are used for a global evaluation of calamine intensity on the monitored area of the billet in continuous casting. This kind of approaches is applied in continuous casting process for constructing a complementary condition monitoring system, which allows an online calamine evaluation. Simulation results, based on the measured surface temperature and the adaptive support vector machine analysis, showed that this new combined approach is easily implementable and gives good results when applied online.

Keywords

Continuous casting, Surface billet casting, Infrared temperature measurement, Adaptive support vector machine (ASVM), Process and quality evaluation

Références

Documents relatifs

The process faults are identified using the following statistical parameters: Q-statistic, also called squared prediction error, and Q-residual contribution. The proposed method

This study will mainly investigate a technique based on principal component analysis in order to improve the accuracy for fault diagnosis of casting process. The

Methods such as soft sensing andadaptive support vector machine are used for a global eval-uation of calamine intensity on the monitored area of thebillet in continuous casting..

Through the identification of thermal proprieties by many thermal analysis methods, we have obtained high insulting properties in high temperature up than 1400°C when the beginning

I earned Engineer in metallurgy Option: foundry at theBADJI MOKHTARAnnaba University, Algeria, Magister in metallurgy Option: Process modeling and thermal in foundry

A study was conducted to see the effect of addition of carbon black and diatomite to natural silica (sand) for a mould powder used in Arcelor Mittal Steel Annaba. Keywords :

A study was conducted to see the effect of addition of carbon black and diatomite to natural silica (sand) for a mould powder used in Arcelor Mittal Steel Annaba.. Keywords –

The morphological, thermal and structural studies were followed byelectron scanning microscopy (MEB), differential scanning calorimetry (DSC/ATG) and X-ray diffraction (XRD) using