• Aucun résultat trouvé

Solution processable donor–acceptor oligothiophenes for bulk-heterojunction solar cells

N/A
N/A
Protected

Academic year: 2021

Partager "Solution processable donor–acceptor oligothiophenes for bulk-heterojunction solar cells"

Copied!
9
0
0

Texte intégral

Loading

Figure

Fig. 2 Absorption spectra of PhNOF-OT(n)-DCN and G 2 -OT(n)-DCN in (a) chloroform and (b) DMSO.
Table 2 Summary of PV device performance with a device structure of ITO/PEDOT : PSS/oligomer : PCBM/LiF (0.95 nm)/Al (130 nm)

Références

Documents relatifs

The principle of tandem cell architecture is two solar cells in series, with different absorption characteristics to cover a wider range of the solar spectrum,

We compared a common subset of ACE and PENG with Afrikaans and identified five structural aspects in which Afrikaans differs from these two machine-oriented controlled

As for bulk heterojunctions, comparison of the action spectra of the bilayer cells with the corresponding optical spectra in Figure 1 shows that the changes in the EQE spectrum

The characterization of PHJ solar cells with C 60 as acceptor layer shows that replacement of DCV groups by TB leads to a decrease of conversion effi ciency due possibly to

Spin-coated 52-nm-thick films of newly synthesised gadolinium liquid crystalline bisphthalocyanine sandwich (GdPc 2 ) complexes with octyl chains non-peripheral positions have

In order to benefit from the new cell architecture, the implanted additional (p + )c-Si layer requires a high temperature treatment to properly activate the boron atoms and limit

Fig.4 reports the J(V) parameters of the cell, which have been simulated for different thicknesses of the p-aSi layer from 3nm to 50nm.The extreme case t a-Si =50nm is only used,

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des