• Aucun résultat trouvé

Design and Analysis of Printed Circuit Boards Using FDTD Method for The 20-H Rule

N/A
N/A
Protected

Academic year: 2021

Partager "Design and Analysis of Printed Circuit Boards Using FDTD Method for The 20-H Rule"

Copied!
7
0
0

Texte intégral

Loading

Figure

Fig. 1 The 2D Planar Structure
Fig 4. Implementation of PML
Fig 7. The Comparison of FDTD result vs. Bessel function expansion result  along the propagation center axis of cylinder at two frequencies
Fig 8.Poynting Vector in Time Domain (f=300Mhz, L=4cm, h=0.4mm)
+3

Références

Documents relatifs

In this work, simulation by finite elements method is realized with aim to calculate the electromagnetic energy of interaction: probe and piece (with/without defect).From

The finite difference time-domain (FDTD) method applied to the computation of resonant frequencies and quality factors of open dielectric resonators... Classification

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

1 below, the considered refractive index was 1.46, corresponding to the index of the fused silica at the 632.8 nm designed wavelength that we selected (He-Ne laser). Using the FDTD

Bordas would like to acknowledge partial support for his time from European Research Council Starting Independent Research Grant (ERC Stg grant agreement No. 279578)

Neumann or Robin boundary conditions â First results with a mixed formulation Dynamic equation : heat equation. Michel Duprez Rule of the mesh in the Finite Element

Based on the discussion from the above paragraphs, in this paper we follow closely the ap- proach given in [9], and present the stability and convergence analyses of both

De plus, les frais d’entretien sont moins élevés dans les installations utilisant l’acide sulfurique, c'est le procédé le plus utilisé, tandis que la deuxième