Optimization of Arrival and Departure Routes in Terminal Maneuvering Area
Texte intégral
Figure
Documents relatifs
Comparing to the previous method based on a genetic algorithm, which was able to find only a locally optimized solution and only for one PLL in tens of seconds, the new method
A digit-by-digit analysis was conducted of each number entered to determine what types of errors were made. Table 1 summarizes the total number of digits that
But it is actually unclear in the paper whether internal outcasting is used by the authors to refer only to a global international legal order or whether it could also be used
As a result, the solutions may be optimal in neither of these criteria, as the route length and the graph weight are contradictory objectives, most of the time (the route
However, the simultaneous optimization method for trajectory and sequence is not enough for the merging optimization method for the E-TMA, because aircraft enter the TMA from
In this case, the laser pump excites the titanium film and, through a thermoelastic process, leads to the generation of picosecond acoustic pulses that propagate within the copper
We also performed combined water entry and exit experiments with a conical mock-up in order to investigate the performance of the LED edge-lighting technique for the tracking of
We show that the corresponding optimal designs (associated with the penalized problems) are close (in an appropriate sense) to an optimal design of the original