• Aucun résultat trouvé

SPH model approach used to predict skin inclusions into semisolid metal castings

N/A
N/A
Protected

Academic year: 2021

Partager "SPH model approach used to predict skin inclusions into semisolid metal castings"

Copied!
9
0
0

Texte intégral

Loading

Figure

Figure 1: Porosity lens defects
Figure 2: shear layer
Figure 3: suspension arm Results and discussion
Figure 4: filling sequence, single ring
+2

Références

Documents relatifs

Second, as a contribution to the empirical literature, we use DID-matching to estimate the average treatment effect of the French AES program, implemented between 2000 and 2007, on

The use of Matrix Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS) has recently emerged as an effec- tive, rapid and inexpensive tool to

Meanwhile, O2 and O3 have also the same impact on CR and MR which is almost the same for both levels (CR median value is 8% and around 5% for MR). However, the impact of applying

En pratique cette valeur correspond à la largeur d’un guide d’onde rectangulaire en technologie volumique classique dont la fréquence de coupure est identique au guide SIW

2. I also examined government documents of parliamentary debates, insurance acts, regulations and insurance schemes; reports by the Ministry of Agriculture,

- PRÉSENCE DE NEMOPSIS BACHEI (Agassiz) DANS LES EAUX SAUMATRES DE LA GIRONDE (AN-

Nonlinear Dirac Equa- tion On Graphs With Localized Nonlinearities: Bound States And Nonrelativistic Limit.. ArXiv e-prints,

In order to better understand the discontinuity at the SPH-FVM interface, this test case was used to analyze the differences between the Finite Volume and Smoothed Particle