Dissimilar Welding between 2205 DuplexStainless Steel and API X52High Strength LowAlloy Steel

Abstract_ Dissimilar metal joints between X70 and duplex pipes will be required to prove their weldability in the oil and gas industry, the welds have been

However dissimilar is often more difficult than joining the same metals, due to the differences in the physical, mechanical, and metallurgical properties of the metals to be

The microstructure indicates the presence of austenite in different forms on the weld zone of ER2209, same in the case of ER 2594, but with higher content and finer grains size,

The aim of the present study is to investigate the influence of the welding process parameters on the microstructure and mechanical properties of dissimilar weldement of 2205

The aim of the present study is to investigate the influence of the welding process parameters on the microstructure and mechanical properties of dissimilar weldement of

Duplex stainless steels 2205 are widely used in constructional and petrochemical applications because of their good mechanical and corrosion properties. The objective of

Abstract : Duplex stainless steels (DSS) are prone to intermetallic phase formation at high temperatures, which can drastically decrease the toughness property.. This work

After aging treatments, all samples were annealed at 1080°C for 60 min and quenched in water; this treatment led to a complete dissolution of sigma phase and