• Aucun résultat trouvé

Faults Diagnosis of Rolling Bearing Based onEmpirical Mode Decomposition: OptimizedThreshold De-noising Method

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Faults Diagnosis of Rolling Bearing Based onEmpirical Mode Decomposition: OptimizedThreshold De-noising Method"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

8th International Conference on Modelling, Identification and Control (ICMIC-2016) 2016

Faults Diagnosis of Rolling Bearing Based on Empirical Mode Decomposition: Optimized

Threshold De-noising Method

Rabah ABDELKADER, Ziane DEROUICHE, ZERGOUG Mourad

Abstract : The faults of rolling bearings frequently occur in rotary machinery, therefore the rolling bearings fault diagnosis is a very important research project. The vibration signal is usually noisy and the information about the fault in the early stage of its development can be lost. A threshold de-noising method based on Empirical Mode Decomposition (EMD) is presented in this paper.

Firstly, the signal is decomposed into a number of IMFs using the EMD decomposition .Secondly the algorithm based on the energy to determine the trip point is designed for IMF selection, then, by comparing the energy of the selected IMFs with excluded IMFs, singular selected IMFs are dealt with soft threshold function, and finally the de-noised signal is obtained by summing up the selected IMFs, it is proved that the best IMFs can be summed up and properly de-noised by the proposed method .The results show the effectiveness of the proposed technique in revealing the bearing fault impulses and its periodicity for both simulated and real rolling bearing vibration signals.

Keywords : bearing fault detection, EMD, threshold De-noising, IMF selection, Singular IMF

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.92 KB )

Documents relatifs

Real-time tumor ablation simulation based on the dynamic mode decomposition method

In the present study, a Dynamic Mode Decomposition (DMD) method in conjunction with the meshless point collocation method has been used in order to numerically solve the

Relabeling and Summarizing Posterior Distributions in Signal Decomposition Problems when the Number of Components is Unknown

In this section, we will investigate the capability of VAPoRS for summarizing variable-dimensional posterior distributions using two signal decomposition examples; 1) joint

Summarizing Posterior Distributions in Signal Decomposition Problems when the Number of Components is Unknown

In this paper, we propose a novel approach to summarize the poste- rior distributions over variable-dimensional subspaces that typically arise in signal decomposition problems with

Rolling bearing faults diagnosis based onempirical mode decomposition: Optimizedthreshold de-noising method

Secondly the algorithm based on the energy to determine the trip point is designed for IMF selection, then, by comparing the energy of the selected IMFs with excluded IMFs,

Rolling Bearing Faults Diagnosis Based on Empirical Mode Decomposition: Optimized Threshold De-noising Method

Firstly, the signal is decomposed into a number of IMFsusing the EMD decomposition .Secondly the algorithm based on the energy to determine the trip point is designed for

Faults Diagnosis of Rolling Bearing Based on Empirical Mode Decomposition: Optimized Threshold De-noising Method

Firstly, the signal is decomposed into a number of IMFs using the EMD decomposition .Secondly the algorithm based on the energy to determine the trip point is designed

Bearing Fault Diagnosis Using De-noising Techniques Based on EMD Combined with Coefficients Correlation

The application of this technique to the experimental results shows that this method can extract effectively the fault features of rolling bearing compared with the others

Bearing Fault Diagnosis Using De-noising Techniques Based on EMD Combined with Coefficients Correlation

In this pa- per, a new denoising method based on Empirical Mode Decomposition Iterative Interval Thresholding and estima- tion of correlation coefficient (EMD-corIIT) is presented.