Multi-layered multi-material finite element for crashworthiness studies

Ksiksi, Constitutive modelling effect on the numerical prediction of springback due to a stretch- bending test applied on titanium T40 alloy, Arch. Boyer, An overview on the use

We investigated the time- course of changes in middle cere- bral artery mean flow velocity (FVm) and intracranial pressure (ICP) in head-injured patients during sus- tained

We define functions to mimic the IEEE standard floating point arithmetic using the exact multiple precision rational arithmetic of Maple.. Most of them use two parameters: lgfr ,

We propose to use three different modalities providing an increasing insight at the patient’s morphology: (1) Kinect surface scanner (giving access to the external

The analysis of the crushing and bending data shows that the maximum tensile stress of the supports is lower when measured in crushing than when measured in three-point bending (

Abstract— The aim of this work is to develop a quadrilateral finite element based on Reddy’s third order shear deformation theory for the bending behavior analysis

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Finally, the limitations of the available testing setup did not permit the investigation of the material flow issue at higher temperatures and strain limits; nevertheless, it does not