• Aucun résultat trouvé

Développement d'un capteur à base de polymère à empreintes moléculaires pour la quantification de la sphingosine 1-phosphate libre et circulante comme biomarqueur du mélanome cutané

N/A
N/A
Protected

Academic year: 2021

Partager "Développement d'un capteur à base de polymère à empreintes moléculaires pour la quantification de la sphingosine 1-phosphate libre et circulante comme biomarqueur du mélanome cutané"

Copied!
155
0
0

Texte intégral

Loading

Figure

Figure 1.11 : Formation et dégradation de la S1P [17].
Figure 1.13 : Le rhéostat sphingolipidique. Abréviations : SphK sphingosine kinase, SPP S1P phosphatase [17]
Figure 1.16 : Etapes de la préparation d’un MIP (d’après P. Manesiotis).
Figure  1.22  :  Différentes  mises  en  forme  des  MIPs.  a)  format  «  bulk  »,  b)  microbilles,  c)  microfilaments,  d)  membrane poreuse (d’après [93], [99])
+7

Références

Documents relatifs

This system is composed of a very affordable commercial depth camera and of the particle filter data-assimilation method proposed by Papadakis et al (2010), dealing with

La présentation clinique de la syngnathia est très variable le diagnostic est généralement facile et se fait le plus souvent à ou peu après la naissance. Il est évident

les produits de fission solides sont présents sous différentes formes La /:..

The results of NMR evidenced the effect of cerium content on the hybrid structure: for a concentration higher than 0.01 M, there are important modifications of the organic and

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Extraction of fairly reactive metals Metals towards the middle of the reactivity series, such as iron and zinc, may be extracted by reducing the metal oxide with the non-metal

We identified an initial set of narratives, reviewed them, and interpreted the data, using what we knew about the subject based on documents, press articles, and the

PLM systems is often associated to many applications (e.g. Computer-Aided Design - CAD, Computer Aided Manufacturing - CAM, etc.) at different phases of the