• Aucun résultat trouvé

Fiber Breakage and Fiber Pull-Out of Fiber-Reinforced Ceramic-Matrix Composites

N/A
N/A
Protected

Academic year: 2021

Partager "Fiber Breakage and Fiber Pull-Out of Fiber-Reinforced Ceramic-Matrix Composites"

Copied!
20
0
0

Texte intégral

(1)

HAL Id: hal-02342243

https://hal.archives-ouvertes.fr/hal-02342243

Submitted on 31 Oct 2019

HAL is a multi-disciplinary open access

archive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers.

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

Fiber Breakage and Fiber Pull-Out of Fiber-Reinforced

Ceramic-Matrix Composites

François Hild, Alain Burr, Frederick A. Leckie

To cite this version:

François Hild, Alain Burr, Frederick A. Leckie. Fiber Breakage and Fiber Pull-Out of Fiber-Reinforced Ceramic-Matrix Composites. European Journal of Mechanics - A/Solids, Elsevier, 1994, 13 (6), pp.731-749. �hal-02342243�

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)

Références

Documents relatifs

This method was applied to carbon and PVA fiber reinforced high performance composites and was used to optimize the rheological properties of these composites for an application in

In order to evaluate the influence of plasticizing on flax fibers, the dependence of their elastic modulus to water content was updated to fit the local Halpin-Kardos homogenized

As far as composites and their corresponding matrices have different viscoelastic responses (composites are yield stress shear-thinning flu- ids and MAPP/PP blends demonstrate

The effective elastic moduli of three-phase composites, composed of a ductile matrix, randomly located yet unidirectionally aligned circular fibers, and voids, are derived by using

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

To determine the ultimate strength of a CMC, one needs to determine the average pull−out length as a function of the load level in the fiber. This Note is devoted to establishing

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des