• Aucun résultat trouvé

Scratch evaluation on a high performance polymer

N/A
N/A
Protected

Academic year: 2021

Partager "Scratch evaluation on a high performance polymer"

Copied!
10
0
0

Texte intégral

Loading

Figure

Figure 1. Scratch test device
Table 1. Mechanical and thermal properties of the materials used in this work.
Figure 2. Typical course of the scratch loads versus scratch length measure  in PEEK-E02 with a progressive load of 50N
Figure 5. Typical course of the scratch loads versus scratch length measure   in PEEK-S01 with a progressive load of 50N
+2

Références

Documents relatifs

This article deals with the furan/maleimide type adduct synthesis from furfuryl alcohol and N-phenylmaleimide without solvent and its thermal behaviour in melt polymer matrices

In our study and as described in the experimental part, the incorporation of silver nanoparticles into pp-AAl is obtained by successively dipping the plasma polymer into

We show that one can thus obtain information from static light scattering experiments on the concentration dependence of both the micellar size distribution and the

Thus the binary collisions play a prevailing role in a polymeric coil; if B = 0 then the contribution in all the characteristics of the chain from these collisions vanishes

2014 Finite-size scaling of Monte Carlo generated order parameter (intrinsic density of monomers) and specific heat of square lattice polymers near the collapse

2014 When the free surface of a solution of long polymers in a good solvent is strongly attractive, the concentration profile is given by a universal law.. This

Polymer adsorption near the surface of a polymer solution : a universal behaviour..

Electronic irradiation effects on the electrical be- haviour of a high- performance space-used thermoplastic polymer... Electronic irradiation effects on the electrical behaviour of