On the use of the eXtended Finite Element Method with Quatree/Octree meshes
Texte intégral
Figure
Documents relatifs
Figure 7.2. It has to be stressed that in all the experiments without stabilization, and particularly for the P 1 /P 0 case, a singular linear system can be obtained. However, in
Institute of Structural Analysis and Dynamics of Structures, Department of Civil Engineering, Aristotle University Thessaloniki, Panepistimioupolis Mail Stop 502, 54124
The double-interpolation approximation is constructed through two consequent stages of interpolation, i.e., the linear nite element interpolation for the rst stage to produce
Neumann or Robin boundary conditions â First results with a mixed formulation Dynamic equation : heat equation. Michel Duprez Rule of the mesh in the Finite Element
8 Normalized opening stress distribution ahead of the crack tip for topological enrichment, with both linear and quadratic elements, and the reference FEM solution, with mesh
As a last example, the linear smoothing technique is extended to three dimensional domain with a through-the-thickness edge crack subjected to uniform tensile stress as shown in
KEY WORDS : dynamic fracture mechanics; numerical stability; energy balance; extended finite element method; dynamic stress intensity
The contact contribution is computed on a one-dimensional integration element which con- forms to the boundary of the structure inside the extended finite element.. In
