Comparison Between Static and Dynamic Methods for Sorption Isotherm Measurements
Texte intégral
Figure
Documents relatifs
Comparison between TCAD simulated and measured carrier lifetime in CMOS photodiodes, using the Open Circuit Voltage Decay
Moreover, the results obtained with CMA-ES are far more robust: (1) CMA- ES always converges to the same values of the isotherm parameters, independently of its starting point;
First, the OED methodology has been described and used for searching the optimal ex- periment design, ensuring to provide the best accuracy of the identification method for
Abstract — A Poromechanical Model for Coal Seams Injected with Carbon Dioxide: From an Isotherm of Adsorption to a Swelling of the Reservoir — Injecting carbon dioxide into
Similarly, based on eigenfrequencies, the optimal values
As alternative the mean force (MF) method was used where the mean force on a constrained solute molecule is integrated over a path from the bulk fluid to the wall. Here,
Pour ´elucider le m´ecanisme de diffusion facilit´ee, nous avons utilis´e la microscopie de fluorescence par onde ´evanescente pour visualiser l’interaction d’une unique
Due to hysteresis effect, water content for a given relative humidity is between the values given by adsorption and desorption curves depending on the previous solicitations of