• Aucun résultat trouvé

Dynamic modelling and control of a pilot plant for post-combustion CO2 capture

N/A
N/A
Protected

Academic year: 2021

Partager "Dynamic modelling and control of a pilot plant for post-combustion CO2 capture"

Copied!
6
0
0

Texte intégral

Loading

Figure

Figure 1: Simplified scheme of the post-combustion CO 2  capture (Bellona, 2012)
Figure 2: Dynamic model of a pilot capture plant using Aspen Plus Dynamics
Table 1. List of simulated disturbances
Figure 4: L/G optimal ratio in the absorber doesn’t vary much with flue gas load

Références

Documents relatifs

Surprisingly, the corrosion rates of carbon steel in the rich solvent at the inlet of the stripper remained extremely low.. The hypothesis of two-phase flow condition at the

capture at a lower cost and with a higher energetic efficiency than first generation processes using amines such as MonoEthanolAmine (MEA) which are now considered for the first

The first round robin test was performed on solvent matrices, the analytical methods of the participating laboratories were compared using synthetic spiked samples and real

sought to define when rail transit connections to airports make sense from a cost perspective. They examined three generic rail transit access alternatives: 1)

Finally, another benefit of inverse-dynamics control is the clean integra- tion of motion and force control in a unified framework.[9, 10] While contact forces can also be

Instead of trying to align two different vector spaces, we propose to work directly in the shared vocabulary space: we take the neighbors of a word in a vector space to reflect

Une collaboration avec le laboratoire LP3 (Université de Marseille) nous a permis d'estimer les paramètres caractéristiques du plasma (température, densité électronique,

13 morphologie du mot, son interprétation et son stockage sous forme d’une synthèse d’informations (graphisme et phonétique) étant plus fragile dans le temps