• Aucun résultat trouvé

Predicted microstructure in repair technology of Ti-6Al-4V

N/A
N/A
Protected

Academic year: 2021

Partager "Predicted microstructure in repair technology of Ti-6Al-4V"

Copied!
1
0
0

Texte intégral

(1)

Predicted microstructures in repair technology of Ti-6Al-4V

Hoang Tran1

,

Jérôme TchoufangTchuindjang 2

,

HakanPaydas2, Ruben Jardin1, Raoul

Carrus3, Anne Mertens 2, Anne Habraken1,

1 University of Liege (ULg), ArGEnCo Dpt, Materials and Solid Mechanics Unit,

Allée de la Découverte, 1 B52/3, B 4000 Liège, Belgium

2 University of Liege (ULg), A&M Dpt, Metallic Materials Science Unit,

Allée de la Découverte, 1 B52/3, B 4000 Liège, Belgium

3 Sirris Research Centre (Liège), Rue Bois St-Jean, 12, B 4102 Seraing, Belgium 4 F.R.S.-FNRS, Fonds de la Recherche Scientifique, Rue d'Egmont 5, B 1000 Bruxelles, Belgium

hstran@ulg.ac.be, j.tchuindjang@ulg.ac.be, hpaydas@ulg.ac.be, ra.tjardin@ulg.ac.be, Raoul.Carrus@sirris.be, anne.mertens@ulg.ac.be, Anne.Habraken@ulg.ac.be

Laser cladding is a metal deposition technique often used to repair components [1]. Solidification following melting and partial remelting of pre-existing layers is coupled with heat treatment of the solidified material due to the repeated heating and cooling cycles during building. The effect of the building strategy on the metallurgical characteristics of the material for a decreasing track length (DTL) or a constant track length (CTL) strategy is analysed.Optical Microscopy (OM), Stereo Microscopy (SM), and Scanning Electron Microscopy (SEM) were used in order to study the microstructure. The generation of the microstructure results from the material thermal history.

The updated Lagrangian FE code Lagamine developed by ArGEnCo Department of the University of Liège to model forming processes is applied here on the laser cladding process [2]. The 3D-mesh is refined in the deposit and the top of the substrate in order to accurately model heat fluxes while the bottom of the substrate is meshed as coarse as possible. To generate an optimal mesh, transition refinement elements were used. In this powder injection technique, the continuous addition of material on the substrate is modelled by the element birth technique also called “switch” within Lagamine code.

The predicted thermal field is found close from the measurements of type-K thermocouples introduced inside the substrate. Such results were computed for both building strategies: decreasing track length (DTL) and constant track length (CTL) strategy. The predicted temperature histories confirm that a more uniform temperature history is applied to the deposit by the CTL choice than the DTL one. The presence in DTL case of heterogeneity within the hardness measurements and the phases observed by metallography [1] can be explained by the computed temperature distributions. A detailed analysis linking microstructure and thermal history is provided.

[1] Paydas H., Mertens A., Carrus R., Lecomte-Beckers J., Tchuindjang J.T., Laser cladding as repair, technology for Ti–6Al–4V alloy: Influence of building strategy on microstructure and hardness Materials & Design 85, 2015, 497-510.

[2] Tran H.S., Tchuindjang J.T., Paydas H., Mertens A., Jardin R.T., Duchene L., Carrus R., Lecomte-Beckers J. and Habraken A., 2017, “3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations” Mater. Des. 128, 130.

Références

Documents relatifs

A phenomenological crystal plasticity model has been developed to investi- gate the role of Ti-6Al-4V microstructural features on the accommodation of plastic behavior at

Il s’agit d’une étude rétrospective s’étalant du premier janvier 2005 au 30 juin 2011, réalisée au service de gynécologie obstétrique I à la maternité Soussi

All material properties are estimated on the basis of local temperature and relative humidity measurements, by solving the inverse heat and moisture transfer problem.. The

The distribution forms of the samples representing the durations of failure or preventive interventions give useful information on the global behaviour of the equipment in relation

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Additionnal rheological data might be obtained using the presented procedure of off-equilibrium torsion testing, at various temperatures, and by varying phase fraction values

The regulation of ARE-mRNA expression in testis might imply interaction with ARE-binding proteins. Among these, we focused on HuR because we previously showed that its overexpression

The cost increment to produce discontinuously TiB reinforced titanium matrix composites via investment casting with respect to conventional titanium alloys at industrial scale is