• Aucun résultat trouvé

Bistable swirled flames and influence on flame transfer functions

N/A
N/A
Protected

Academic year: 2021

Partager "Bistable swirled flames and influence on flame transfer functions"

Copied!
14
0
0

Texte intégral

Loading

Figure

Fig. 1. Burner details and reference point A (proportions changed).
Fig. 3. Mesh details on middle cut plane.
Fig. 6. Axial-velocity: comparison PIV and LES.
Fig. 9. Tangential velocity: comparison PIV and LES.Fig. 7. y-velocity: comparison PIV and LES.
+7

Références

Documents relatifs

En comparaison avec les corpus existants annotés discursivement (en particulier le Penn Discourse TreeBank pour l’anglais), le corpus ANNODIS présente deux carac- téristiques propres

Wind-uplift resistance of FBA depends on several factors namely, on the application and bonding strength of the adhesive, bonding strength of the membrane with insulation and

The figure shows that by combining various snapshots across time/distance, RF-Capture is capable of capturing a coarse skeleton of the human body..

What we know about human behaviour in fire is that the three dimensions of the fire event, namely the occupant, building and fire characteristics, interact to explain or

Selecting the 120 kHz frequency bandwidth of the filter it is ¾ spectrum magnitude of the analysis signals and central frequencies of the filter are left the same: 150 kHz,

In the present study, the influence of the cylinder cross-section on the coherence length is studied experimentally in BETI wind tunnel, by hot-wire anemom- etry of the flow over

The net volume transport through Fram Strait with the constraints applied is estimated as 3.1 Sv southward averaged over the four northern and four 79 ◦ N sections. The mean

Structural inheritance in the Central Pyrenees: the Variscan to Alpine tectonometamorphic evolution of the Axial Zone... Abstract