• Aucun résultat trouvé

Validation of image restoration methods on 3D-printed ultrasound phantoms

N/A
N/A
Protected

Academic year: 2021

Partager "Validation of image restoration methods on 3D-printed ultrasound phantoms"

Copied!
5
0
0

Texte intégral

Loading

Figure

Figure 1. Phantom design. In the outer frame, spheres were placed at 5  mm distances to each other and at least 10 mm from the walls
Table 2 lists the resulting FWHM and RMSE values. For the  settings used,  = 0.5 offers a higher spatial resolution gain than

Références

Documents relatifs

Equilibrated warping provides a good registration in three different types of images (i.e. tagged and untagged magnetic resonance images as illustrated in [7], and 3DUS images

The results obtained are shown to improve a previously proposed recovery method, where the correlation between RF signals was taken into account by assuming the

كف غراف ءيش نم طقاستت نأ تارطقل في ريراوقلا لأمتو ، ةظفل فيظت اهنكل ( ءاوخلا ) ةللادلل ةايحلا هذهل يمدعلا دوجولا ىلع. نأ دجن ةديصقلا لكش ىلإ رظنلاب امأ

blurred cotton image and 4 kinds of algorithm recovery image after contour extraction The results of computing time on cotton images that computing time of four algorithms

FIGURE 2 | Changes in (A) pre-dawn leaf water potential (9 PD ) and (B) relative water content (RWC) in varieties under three different water conditions: control (black points),

Hybrids are indeed close to the domesti- cus parents for size and shape regarding the molar zone, but for the coronoid process, F1 hybrids are close to the domesticus size but have

A common finding throughout the present review is that decreased sleep may be present time before BD onset in a variable percentage of patients ranging from 24% to 44% in

STEP 2 Find an optimal solution using the two-commodity subtour elimination constraints [3]. If integer valued STOP, if not go to