Modélisation et commande prédictive de pompes à chaleur géothermiques résidentielles auto-assistées

IRIT (Institut de Recherche en Informatique de Toulouse) 2 CNRS, 1 Université Paul Sabatier, Toulouse,

For that purpose, a generic SOC (State of Charge) has been defined for each energy flow: the ratio between the hydrogen pressure in the tank and the maximum authorized pressure

/ La version de cette publication peut être l’une des suivantes : la version prépublication de l’auteur, la version acceptée du manuscrit ou la version de l’éditeur.. For

Following secondary immunization with NP-KLH only, the Cxcr4 +/1013 BM chimeras were able to mount a memory im- mune response comparable to the one observed in WT BM chi- meras (

Yang, “Study on performance of solar assisted air source heat pump systems for hot water production in Hong Kong,” Applied Energy, vol. Chen, “Development and experimental validation

1) Condensing and evaporating pressures /temperatures. 2) Heating and cooling capacities. 3) Temperature of water in reservoir. 4) Refrigerant mass flow rate of the compressor. 5)

The PV-T model is able to represent many different types of integration of the PV collector in the building envelope : integration without thermal interaction with the

The National Roofing Contractors Association (NRCA) and the Institute for Research in Construction (IRC) collabo- rated on a study of blistering in hot- applied SBS-modified