• Aucun résultat trouvé

Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hot and Superplastic Forming Conditions: Experiment and Modeling

N/A
N/A
Protected

Academic year: 2021

Partager "Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hot and Superplastic Forming Conditions: Experiment and Modeling"

Copied!
7
0
0

Texte intégral

Loading

Figure

Fig. 1: Grain size evolution during the annealing tests at several temperature levels from 730 ◦ C to 920 ◦ C and an initial average grain size of 3µm
Fig. 2: Grain size evolution observed during the tensile test for an intial average grain of 0.8µm, sev- sev-eral temperature levels (from 650 ◦ C to 800 ◦ C) and strain rates (from 10 −4 s −1 to 10 −2 s −1 ); influence of the loading path on the texture e
Fig. 3: Comparison between computed grain growth curves and experiment under dynamic conditions from 920 ◦ C to 940 ◦ C (a) and from 730 ◦ C to 840 ◦ C (b).
Fig. 4: Model predictions at T = 730 ◦ C (a-b) and T = 840 ◦ C (c-d)
+2

Références

Documents relatifs

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Nous proposons et nous modélisons en régime stationnaire et en régime dynamique le couplage de micro-résonateurs non-linéaire pour la réalisation de fonctions de régénération

Mais revenons aux kits d'éclairage. L'expérimentation met en évidence un certain nombre de problèmes dont la nature est inextricablement sociale et technique: en situation, le kit

Mais au moment où le bourreau est en train de couper la tête de Siyâvosh, une goutte de sang tombe par terre et [le fait] que l’Iran et le Touran se voient d’un mauvais oeil est dû

The Turn-Taking system is done through a Finite State Machine (FSM) that specify the current state of the agent and the different transition between states regarding whether the

[r]

Cette étude vise à renforcer le curriculum médical actuel de l’Université d’Ottawa de manière à améliorer la préparation à l’externat en s’attardant

2.3 ANÁLISE DA PRECIPITAÇÃO EM MARÇO A precipitação esperada para Março, que marca o fim do período chuvoso no Espírito Santo, varia de 120 ha 150 mm em quase toda a metade