Propagation of uncertainties using probabilistic multi-scale models

Thanks to the com- parison between simulation results and experimental data derived from the Lannemezan-2005 campaign, this study has shown the strong sensitivity of the

In the initial step, all lists are sorted (using quicksort, average O(n log n)) and one axis is used to create initial interactions: the range between lower and upper bound for

Neumann or Robin boundary conditions â First results with a mixed formulation Dynamic equation : heat equation. Michel Duprez Rule of the mesh in the Finite Element

Test case: square plate with an edge crack with a small kink loaded in vertical

"Evaluation of a Numerical Modeling Approach based on the Finite Element Method for calculating the Rough Surface Scattering and Emission of a soil layer" IEEE

Clearly then, by choosing the base width and growth conditions appropriately, it is possible to tune the emission wavelength of individual, site-selected InAs/InP quantum dots close

In addition, solitary, cnoidal, and dispersive shock waves are studied in detail using this numerical scheme for the Serre system and compared with the ‘classical’ Boussinesq system

First, the 3D micro structures of the porous media are constructed with a parametric program which allow to control the pore sizes, pore orientations,