Thermal cycling behavior of EBPVD TBC systems deposited on doped Pt-rich γ–γ′ bond coatings made by Spark Plasma Sintering (SPS)
Texte intégral
Figure
Documents relatifs
As weak pronouns are placed in a dedicated position of the clause that does not coincide with the one(s) of clitics (Cardinaletti 1991), Ordóñez and Repetti can account
(2) The flame-spread rating and smoke devel- oped classification of a material or assembly of materials shall be determined on the basis of not less than 3 tests conducted
The known results are given in particular for singular perturbations of isolated points of the boundary (small holes in the domain, see [16], [17], [5], [1], [18], [37] and
Avant d'aborder cette analyse, il est important au préalable de faire savoir qu’il est difficile de cerner les éléments et les paramètres pris en compte pour l'étude hydrologique
In order to determine a reasonably high upper limit for the effects of stress relaxation or a minor amount of hole deterioration, a synthetic seismogram was generated for an
(a) Time line of the interaction potentials corresponding to the simulation of a complex process on EWOD consisting of transport, merging and splitting liquid droplets; (b–g)
The flow of water over long time scales has shaped river basins. Also the shape of river basins is a controlling factor in the generation of runoff
The specification must be a realistic performance specification for the materials intended to be used and give attention to the preparation, mixing of materials, application