Attrition Resistance of CaO-CuO-Cem Powder for CO2 Capture in Calcium Looping Processes

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

A CFD-DEM simulation of a single jet in a fluidised bed is then performed and used to evaluate the overall attrition using the single particle breakage model and coupling it with

Three filled formulations called PPE60-A21, PPE60-B21 and PPE60-C21 were characterized by DMTA after curing 2 h at 220°C in order to gain information about the

Conclusion: PathoFact is an easy-to-use, modular, and reproducible pipeline for the identification of virulence factors, bacterial toxins, and antimicrobial resistance genes

No significant variation of fine size distribution is obtained as a function of particle diameter ; in addition the particles collec- ted in the cyclone are size - like

Köpke & Schmid (2004) point out that if there is one question in L1 attrition for which there is ample converging evidence, it is that attrition in children is

The comprehensive approach to the development of a product should analysis all of the phases, from the design to the manufacturing for the selection of a good combination

Figure 1: Load versus opening displacement curves of PVDF at various temperatures With these definitions, it turns out that the fracture surface of SENB specimens is totally ductile