• Aucun résultat trouvé

Pressure drop and average void fraction measurements for two-phase flow through highly permeable porous media

N/A
N/A
Protected

Academic year: 2021

Partager "Pressure drop and average void fraction measurements for two-phase flow through highly permeable porous media"

Copied!
12
0
0

Texte intégral

Loading

Figure

Fig. 1. The CALIDE facility.
Fig. 2. Particles used to validate the void fraction measurement.
Fig. 4. Capacitive probe set-up.
Fig. 7 presents the void fraction measurements through 4 mm glass bead bed versus air and water filtration velocity
+5

Références

Documents relatifs

Specifically, we anticipate its primary uses by determining and using (see section 3): (1) the relationship between the wavenumber and impedance and time-domain response

It is found that in addition to the balancing effect of compressive lattice-mismatch strain induced by the AlN interlayers, buried cracks in the AlN interlayer region can also

Overall process of photosynthesis can be divided into four steps for convenience (6): (a) sunlight capture and energy transport by light-harvesting antenna complexes, (b) charge

Para avaliar a interação entre temperatura, substrato e luz na germinação, as sementes foram distribuídas em três substratos distintos: entre areia (EA), sobre

101 - 54602 Villers lès Nancy Cedex France Unité de recherche INRIA Rennes : IRISA, Campus universitaire de Beaulieu - 35042 Rennes Cedex France Unité de recherche INRIA Rhône-Alpes

Laboratory experiments can help us understand many aspects of the behaviour of marine plastic debris in the ocean and validate parameterisations before they are used in

follows the assurance that if a given point is a center of melting, then the points found in its vicinity, enclosed in a small volume equal to the volume of the critical molecular

Observation Site information Specific component Discovery Portal Graph database End Point GeoDCAT metadata 19115/19139 Spatial information Spatial