• Aucun résultat trouvé

Discrete ply model of circular pull-through test of fasteners in laminates

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Discrete ply model of circular pull-through test of fasteners in laminates"

Copied!
11
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

Figure

Fig. 2. Pull-through in thin L-Joints.
Fig. 5. Typical load/displacement curve of a circular pull-through test.
Fig. 7. Post-mortem failure pattern of a specimen showing splitting and punching.
Fig. 8. Micrographs after test stopped at 90% (Specimen A and point A Fig. 5), 100% (Specimen B) and 110% (Specimen C and point C Fig
+6

Références

Télécharger maintenant ( PDF - 11 Page - 7.02 MB )

Documents relatifs