• Aucun résultat trouvé

Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements

N/A
N/A
Protected

Academic year: 2021

Partager "Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements"

Copied!
9
0
0

Texte intégral

Loading

Références

Documents relatifs

For the falling film in linear regime test case, a linear analysis on the Stator model is performed and shows a different but close theoretical stability threshold compared to

Finally, the frequency dependence of the bolometer presented at different temperatures and at optimal current shows that both sensitive and fast uncooled bolometers can be

Ce contexte historique mène à un contexte plus pointu de la question de synchronisme musical, présenté comme un champ de recherche, étudié longtemps selon le contexte de suivi

Evolution du coût théorique d’un apprenti pour l’entreprise en % du coût d’un jeune salarié au SMIC. Dans une entreprise de 11 à 19 salariés, embauche d’un apprenti

For this reason, only the predicted Ct, Kt, Kq and propeller revolution rate n obtained with the finest grid as well as the relative error compared with measurement

Miniaturized standard PZT sensors were developed to compose a pitch-catch based active sensor network for guided wave excitation and acquisition in the train bogie, and a

ACE, OSIRIS, and Bruker FTIR partial columns were calculated for 17–40 km; GBS- UV and GBS-vis partial columns were retrieved for 17 km to the top of the atmosphere; and SAOZ

In de- layed mode, the float PIs are asked to flag the data (TEMP, PRES and PSAL) of TNPD floats as bad (flag 4) when float data show observable temperature and salinity anomalies