Experiments and dynamic modeling of a reactive distillationcolumn for the production of ethyl acetate by consideringthe heterogeneous catalyst pilot complexities

25 and 75 m depth, and the Strengbach catchment in the Vosges Massif (France), where several shallow boreholes, 50 to 120 m deep were drilled in the upper part of

An advantage (which turns out to be also a disadvantage) of the approach lies in its lovingly intensive description of training at the primary school Ievel, There is probably no

For cellulose acetate grafted with ammonium ionic liquids containing different anions, the anion influence on the sorption data generally followed the same trends as for the first

A generic plate model has been formulated using warping functions in order to describe the transverse shear stresses.. This model can handle classical plate theories as well as

In this study, an experimental work on the rheology of the reactive PA6 resin has been presented, which showed the influence of polymerization and crystallization on the dynamic

Table 2: Molecular constants of ethyl acetate (trans conformer) obtained with program XIAM and comparison with results of BELGI-C s and ab initio results. 14

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

In particular, the objectives of this study included the characterization of the spring hydrograph considering the effect of (1) the amount of exchange flow by assigning