• Aucun résultat trouvé

Multi-MGy Radiation Hard CMOS Image Sensor: Design, Characterization and X/Gamma Rays Total Ionizing Dose Tests

N/A
N/A
Protected

Academic year: 2021

Partager "Multi-MGy Radiation Hard CMOS Image Sensor: Design, Characterization and X/Gamma Rays Total Ionizing Dose Tests"

Copied!
10
0
0

Texte intégral

Loading

Figure

Fig. 1. Architecture overview of the studied CMOS Image Sensor (CIS) Inte- Inte-grated Circuit (IC)
Fig. 2. Illustration of the TID induced degradation mechanisms in Pinned Photodiodes (PPD) and conventional photodiode (referred to as 3T here) at moderate (2-20 kGy) and high TID ( kGy)
Fig. 3. Cross sectional views of the studied photodiode layouts.
Fig. 6. External Quantum Efficiency (EQE) of the studied pixels before irradi- irradi-ation
+5

Références

Documents relatifs

The split-root assay results described above suggested that AOI was mediated by a mobile signal migrating from the proximal to the distal root either via the plant

are used wherever they appear in the NLO corrections in order to improve the perturbative results, similar to what has been done in the single Higgs production case where using

Numerous small scale applications have been developed for vibration and noise control. These typically precede the full scale development and serve as proof-of-concept for new

For the receiver located before the beginning the structure (Figure 5.12a), two groups of waves travelling at different velocities are visible between 50-100 Hz and above 150

Par aill eurs , alor s que les émissions globales de gaz à effet de serre (GES) continuent d'augmenter à un rythme d 'environ 3 % par année et menacent de

Il est intéressant de constater que plusieurs objectifs et priorités envisagés par ce plan vont de pair avec les objectifs relatifs à l’aménagement du territoire

influ e n ce s r é ciproques.. Au-delà de l'engagement d'éliminer toute fo nne de colonialisme en Afrique , la Charte ne contient aucune disposition en matière d '

D’après le tableau 4.2, le support des deux items flous [Précipitations, modérée] =0.04 et [Précipitations, forte] = 0.02 est inférieur au M f s = 0.1 (ne sont pas des items