• Aucun résultat trouvé

Influence of veneer lathe checks on the mechanical properties of LVL

N/A
N/A
Protected

Academic year: 2021

Partager "Influence of veneer lathe checks on the mechanical properties of LVL"

Copied!
10
0
0

Texte intégral

(1)

Science Arts & Métiers (SAM)

is an open access repository that collects the work of Arts et Métiers Institute of Technology researchers and makes it freely available over the web where possible.

This is an author-deposited version published in: https://sam.ensam.eu

Handle ID: .http://hdl.handle.net/10985/10219

To cite this version :

Guillaume POT, Louis DENAUD, Robert COLLET, Stéphane GIRARDON, Fabrice COTTIN -Influence of veneer lathe checks on the mechanical properties of LVL - In: 22nd International Wood Machining Seminar, Canada, 20150614 22nd International Wood Machining Seminar -2015

Any correspondence concerning this service should be sent to the repository Administrator : archiveouverte@ensam.eu

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)

Références

Documents relatifs

procedure: (1) separation of the LREE from matrix elements by selective extraction on the TRU column; (2) first tandem step: back-extraction of the LREE from the TRU column and

present as traces associated with iron metal within large orthopyroxene grains.. The

Dans le cadre de notre enquête, les élèves étaient missionnés par leur dirigeant (fictif) à réaliser par groupe de deux, deux courtes vidéos- tutoriels présentant la compétence

El IICA aspira a ser una institución líder e innovadora en la dotación de cooperación técnica orientada a impulsar la competitividad del sistema agroalimentario, el

A two-layer model describing the interaction of a shear bubble layer formed by breaking waves and an underlying potential layer is derived in shallow water approximation.. A

Several points are studied to validate the model: rupture prediction and projectile velocity evolution, residual target profiles and energy absorbed in the structure..

1 The results presented in this part of the paper were earlier reported in [29].. We propose a distributed algorithm that makes use of WFB values computed at individual nodes to

Below, the histogram plot from figure 6 shows the distributions of the calculated fractal values for the media and adventitia layers as these layers were identified from