Numerical simulation of impacts on elastic-viscoplastic solids with the flux-difference splitting finite volume method
Texte intégral
Figure
Documents relatifs
L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des
In this article, we propose a generalization of the classical finite difference method suitable with the approximation of solutions in subspaces of the Sobolev spaces H −s , s >
This model leads, after time discretization, to a Stokes system with non standard dissipative boundary conditions that cannot be easily and directly implemented in most FEM software,
Neumann or Robin boundary conditions â First results with a mixed formulation Dynamic equation : heat equation. Michel Duprez Rule of the mesh in the Finite Element
• Alternative formulation for a good conditioning of the system matrix â Quasi optimal convergence.. • Necessary and sufficient geometrical conditions remain open â Inclusion
We present a detailed analysis of the convergence properties of the finite cell method which is a fictitious domain approach based on high order finite elements.. It is proved
To prove the optimal convergence of the standard finite element method, we shall construct a modification of the nodal interpolation operator replacing the standard
In figure 1 are sketched both the general setting of a two-phases problem of erosion, where an open flow is coupled to a porous medium, and the particular periodic ho-