Integrated Guided-Wave Structures and Techniques for Millimeter-Wave and Terahertz Electronics and Photonics

Capacitance variation as a function of the bias voltage at 30 GHz and at different temper- atures for IDC devices integrating BST 80–20 (a) and BST 50–50 (b), evolution of the

For various scattering systems, this program was successfully applied: potential scattering in one dimension has been investigated in [24], models of one point interaction in R n with

This characterization is used for the design and development of linear antenna arrays with above 16 dB gain and low side lobe level (< −25 dB), using different power

118 Comparison between simulation results for a ridge and deep ridge S-bend structure of 2-way Wilkinson power combiner.. In the 2x bow-tie and 1x separated bow-tie

Bozzi, “Textile microwave components in substrate integrated waveguide technology,” IEEE Transactions on Microwave Theory and Techniques , vol.. Perregrini, “3d printed

In this thesis, a THz microscopy technique is demonstrated by scanning the sample with a laser beam and detecting these generated THz waves in the sample with optical

Pour cela nous allons appliquer, dans cette optique, le modèle barthésien qui concorde avec cette démarche à l’analyse de notre corpus constitué, comme nous

Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of