• Aucun résultat trouvé

Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation

N/A
N/A
Protected

Academic year: 2021

Partager "Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation"

Copied!
7
0
0

Texte intégral

Loading

Figure

Fig. 2. Evolution of the surface fraction of cracks and spalls versus the number of 1 h oxidation cycles at 1150 °C in laboratory air.
Fig. 5. TBC surface after 55 cycles of 1 h at 1150 °C as a function of TBC thickness (ξ).
Fig. 8. Surface fraction of cracks versus the number of cycles for oxidation of 1 h at 1100 °C and 1150 °C.

Références

Documents relatifs

A constitutive model for rockfills must describe the main features of the behavior of granular materials, namely nonlinear elasticity, shear strength due to

Path loss levels of measurements between the parking and the passenger deck (Fig. 1) show that the transmitter located in front of the watertight door in the parking is not able

Trois études extrêmement importantes ont été commanditées sur ce sujet. La première présente «l'opinion des organis- mes montréalais face aux projets de loi 62 et 28» Elle

Graphite fluorides synthesis results from bi-fluorination processes (room temperature synthesis of graphite intercalation compounds with fluorinated species and high

- La variation de température prédite par le modèle analytique produisant la première fissure radiale dans le béton, à l’interface Barre/Béton des éléments en

La gestion des parcs nationaux est intrinsèquement liée au devenir des communautés locales. Dans sa quête de l’équilibre entre les aspects de

Phospho-dependent recruitment of the yeast NuA4 acetyltransferase complex by MRX at DNA breaks regulates RPA dynamics during resection.. Proceedings of the National Academy