• Aucun résultat trouvé

Real-time distributed systems dimensioning and validation: The TURTLE method

N/A
N/A
Protected

Academic year: 2021

Partager "Real-time distributed systems dimensioning and validation: The TURTLE method"

Copied!
24
0
0

Texte intégral

Loading

Figure

Figure 1 – Three-layer architectural pattern
Figure 2 – TURTLE method for protocol engineering
Figure 3 – How to compute the maximum bound on delays and queues This formalism gives an upper bound for the output flow α ∗ (t),  ini-tially constrained by α(t) and crossing a system with a service curve β(t),using min plus deconvolution  where :
Figure 4 – New TURTLE method
+7

Références

Documents relatifs

In summary, the reckless initiative of describing new fossil turtle species based on fragmentary shell material lacking heterobathmy of characters with its sister group, (as

The results of the T2 test (single-planet orbital solutions) indicate that: 1) orbital periods can be retrieved with very good ac- curacy (better than 10%) and small bias in the

Eco-design, Recycling, Recovery, End of Life materials, Supply chain design, Recycling supply chain, Value chain, R&D Collaborative project, Virtual enterprise, Innovation

Adaptation mechanisms allow to build a custom experimentation stack and to run the same application layer on top of different kind of networks (either real or simulated),

Therefore, if a user interaction through a control of the GUI could change the value of a condition in the code, this means that the statements associated to the control must

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Link name=link3 transmission-capacity=100Mbps Equipment name=Equipment3 service-policy=FIRST_IN_FIRST_OUT <<Equipment>> Equipment3 Link

It is thus that the CAD assembly of the median parts has been realized (Figure 11) and the measured distances on this CAD assembly correspond to the calculated median values in