Blending of Newtonian and Shear-Thinning Fluids in a Tank Stirred with a Helical Screw Agitator

During this interaction, the rel- evant points are the following: sid diameter increases and vortex stretching is still observed as the ring approaches the wall; siid the boundary

• Une plateforme métrologique constituée d’un large éventail de techniques de mesures optiques innovantes : PIV (particle imaging velocimetry) et LDV (laser doppler

In this approach, first the distribution of 3D voxel intensity discretized from the original particle fields is reconstructed, then the velocity is obtained through

Because what is measured when using only one camera is the projection of the local flow velocity vector onto one plane in the light sheet, the deduced displacement vector of

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Pulsatile flow was successfully replicated in a AA compliant model with respect to flow rates and blood properties. Assessed flow fields are described

For the worn tire, linear regression works well for points from 30 to 60 km/h but for high vehicle speed ( V = 70 km/h and V = 80 km/h) the regression does not fit as seen for the

In presence of a grazing flow of bulk Mach number 0.1, however, the influence of the absorber on the duct is reduced on the immediate vicinity of each hybrid cell..