A novel solution approach with ML-based pseudo-cuts for the Flight and Maintenance Planning problem
Texte intégral
Figure
Documents relatifs
the task scheduling subproblem, we discard, via cuts throughout the branch-and-bound tree, maintenance plans that cannot be performed by the technicians.. In addition to the
Then a nonlinear inverse control law based-on this new proposed spatial representation of guidance dynamics is established to make the aircraft follow accurately a vertical
In this paper, we propose an ARIMA-based prognostic approach for tracking the degradation evolution in a steam generator and further predicting its Remaining Useful
The goal of these tests is to investigate the feasibility of obtaining a time of flight measurement between 1 foil (either MCP2 or MCP4) and the DSSD using only digital electronics..
Signals which start with a negative edge have shapeID = 0 and are called ‘crosstalk-like’; ‘single peak’ signals (shapeID = 1) start with a positive edge and only have one peak.
In this paper, we have solved a problem of optimal control in free final time using Pontryaguin’s maximum principle, and for the numerical solution, we used the shooting
Apis mellifera capensis / Apis mellifera scutellata / drone flight time / hybrid zone / South Africa.. Honeybee drones go on mating flights during a species-specific period of
Average and ratio completeness scores do not capture information on the absolute num- bers of taxa or specimens known from each time bin; rather, they provide a proxy estima- tion