• Aucun résultat trouvé

Fracture characterization in cancellous bone specimens via surface difference evaluation of 3D registered pre- and post-compression micro-CT scans

N/A
N/A
Protected

Academic year: 2021

Partager "Fracture characterization in cancellous bone specimens via surface difference evaluation of 3D registered pre- and post-compression micro-CT scans"

Copied!
3
0
0

Texte intégral

Loading

Figure

Figure 2.  registered pre- and post-compression scans and the  location of the fracture as a function of the deformation.

Références

Documents relatifs

The behavior of bovine cancellous bone under compression is measured as a foam-type behavior over the whole range of strain rates explored in this study (Figure 2a). In this way,

Fracture characterization in cancellous bone specimens via surface difference evaluation of 3D registered pre- and post-compression micro-CT scans... Fracture characterization

In the present study, a 3D ‘finite element based’ digital image correlation method is used to determine displacement and strain fields of trabecular bone based on the

Furthermore, this table shows that more than half of occupational wage changes can be due to industry effects: due to either the reallocation of manual or abstract workers

Hence, the influence of the tool axis orientation is significant in 5-axis machining and the description of surface patterns must account for this parameter.. According to

We classify the temperature data according to the hydrogeologic setting of the measurement sites: a high-temperature regime ( >190°C) representing discharge of essentially

A precise numerical model of the isolated Petrous bone structure was built from CT-scan data and used to investigate the fracture process occurring during a lateral

Based on this finding, two optimization approaches are devised to find the geometrical parameters of the artificial microstructure that better mimics the elastic response of