• Aucun résultat trouvé

Thermo-mechanical Effects in Mechanical Polishing of Natural Fiber Composites

N/A
N/A
Protected

Academic year: 2021

Partager "Thermo-mechanical Effects in Mechanical Polishing of Natural Fiber Composites"

Copied!
12
0
0

Texte intégral

Loading

Figure

Fig. 3  shows typical microscopic surfaces  state  after each polishing step. The only difference between  the micrographs from  step  1 and step 2 is the  increasing of polishing streaks
Fig. 3  shows typical microscopic surfaces  state  after each polishing step. The only difference between  the micrographs from  step  1 and step 2 is the  increasing of polishing streaks
Fig. 4. SEM images of the polished surfaces at Step 4 showing the effect of sliding speed
Fig. 4. SEM images of the polished surfaces at Step 4 showing the effect of sliding speed
+4

Références

Documents relatifs

Second, if a dataset does not respect this assumption notwithstanding, it would not be a problem: in such a dataset, the main difficulty of proteomic imputation, that is

normalized lipid data (HBI and fatty acids) representing the position of the 75 bivalves collected species (Mya truncata or Serripes groenlandicus) and sampling year (2015 or 2016)

discontinuity based non local effective strain two quantities: (1) the displacement discontinuity (the crack.. opening), and (2) the error associated to the computation of this

Here, we report for the first time to our knowledge, in a cohort of grade II/III gliomas excluding GBM, a 22 gene predictor which allows an early identification of poor

( http://www.ipef.br/eucflux/ ) for providing inventories of the Eucalyptus plantation plots. The variation of apparent crown size and canopy heterogeneity across

of Atomic Energy Government of India (DAE), Department of Science and Technology, Government of India (DST), University Grants Commission, Government of India (UGC) and Council

Enlarged views of the boxed regions at the bottom show in greater detail the small protrusion which is present before outpocketing begins (bottom left, arrow) and remains

Since the information present in the flux estimates can only reflect the information that was input into the inversion, the minimal spatial scale still constrained by the data