• Aucun résultat trouvé

Extended Mean-Field Homogenization of Viscoelastic-Viscoplastic Polymer Composites Undergoing Hybrid Progressive Degradation Induced by Interface Debonding and Matrix Ductile Damage

N/A
N/A
Protected

Academic year: 2021

Partager "Extended Mean-Field Homogenization of Viscoelastic-Viscoplastic Polymer Composites Undergoing Hybrid Progressive Degradation Induced by Interface Debonding and Matrix Ductile Damage"

Copied!
46
0
0

Texte intégral

Loading

Figure

Figure 1 Micrograph of glass/polyamide (PA66/GF30) composites with interfacial damage induced by void growth  and coalescence
Figure 3 Rheological scheme of the VE-VP-d
Table 1 Summary of the constitutive relations for the VE-VP-d matrix phase
Figure 4  Flowchart of the computational algorithm in modified Mori-Tanaka TFA simulation
+7

Références

Documents relatifs

The experimental data presented in Ducrot et al [13] for the MNE with photophores was for cyclic loading. It is interesting to apply the model under cyclic uniaxial extension to

The present study is restricted to isotropic void-volume growth and nucleation, the voids being assumed, to be spherical in shape and to be uniformly distributed, allowing them to

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Ainsi, l’axiomatique du calcul propositionnel élaborée par Łukasiewicz en 1924 est une axio- matique pure 16 ; par contre, l’axiomatique peanienne de l’arith-

induced interface degradation was found to correlate with the initial radiation damage level and was lowest in TaSia silicide gates (Fig.5B).. Compared to unexposed

It means that, for the models based on both the Lode parameter and the stress triaxiality (i.e. B&W, Xue and LEL), the influence of shear, which is maximum on the wire surface,

Figure 9 : Simulated macroscopic behavior of the macroporous material for different triaxiality ratio under compression : equivalent von Mises stress as a function of

LMS Samtech Samcef efficiently answers these industrial concerns with features such as easy definition of cracks and delamination zones; estimation of the propagation load via