Linearization of power amplifiers in wide band communication systems by digital baseband predistortion technique
Texte intégral
Figure
Documents relatifs
Table 2.2 compares the order of magnitude of the errors introduced by the main high-level sources of errors in the synchrophasor measurement chain: the time synchronization
(11) Since the importance of a basis function can be computed for the signal of only one band at a time, the CS-based method determines the model structure separately for the two
This thesis will have an overview of all different blocks of the TH-UWB transmission link from the transmitter to the receiver, passing through a detailed study of the
The multi stage noise band cancellation architecture made of Σ∆ modulators is an excellent candidate to address the wide bandwidth high resolution and low power consumption trade-off
quite high when no UEs are offloaded. At offload percentage of 1%, the BS power is being distributed over N − 1 UEs. Because of negligible D2D interference, a smaller allocated power
The existence of finite degree matching networks that can achieve the optimal reflection level in a desired frequency band when plugged on to the given load is discussed..
To ensure safety conditions when no valid position message from train 1 is received by TCC within a period of T b (s), an emergency braking message is sent from the TCC to train 2.
As a result, by describing and implementing the prototype cyber-physical system and the test structure, the metamodel is shown to be suitable for describing and maintaining