• Aucun résultat trouvé

Fibre extraction from oleaginous flax for technical textile applications: influence of pre-processing parameters on fibre extraction yield, size distribution and mechanical properties

N/A
N/A
Protected

Academic year: 2021

Partager "Fibre extraction from oleaginous flax for technical textile applications: influence of pre-processing parameters on fibre extraction yield, size distribution and mechanical properties"

Copied!
9
0
0

Texte intégral

Loading

Figure

Fig. 1: Laroche (France) Cadette 1000 fibre extraction device (from Laroche company website)
Fig. 2. Photographs of (a) vegetal dust, (b) shives, and (c) Technical fibres after all the extraction operations
Table 1: Fractions collected at the outlets (dry weights expressed for 100 kg dry matter at the inlet)
Table 3: The three vegetal fractions after full separation of the constituents (results are given in mass percentage)
+2

Références

Documents relatifs

Let us call F the normal form of this formula, i.e. The game we are considering presents, in fact, a great variety of possible plays. We shall see that these various plays

Because of the anodic nature of the (Mg,Zn) 2 Ca particles used in the HSLA concept, the in vivo degradation in a rat femur implantation study is very slow and homogeneous

Fig.2 Relative modulus evolution as a function of ageing time for polyester resin, glass and flax-fibre composites (untreated and silane treated flax fibre) immersed in water

PF-QNM mapping of (a) topography and (b) indentation modulus of developing flax bast fibres extracted from green plant stem and embedded in LR White acrylic resin... PF-QNM mapping of

Figure 8: Transverse continuous saturated permeabilities of flax and glass mat preforms Figure 9: Influence of the increasing temperature upon the weight loss of flax fibres

This research paper aims to identify the importance of electronic commerce for small and medium enterprises, especially in helping them to export their products outside

Agents can support a clearly discernible task or process, interact with each other in a specified environment (say, inventory management), interact with other Agents directly or via

Due to the high dispersion of the dormancy release dates observed between cultivars, fitting a model for different groups of precocity was necessary to obtain