• Aucun résultat trouvé

Range dependent sediment sound speed profile measurements using the image source method

N/A
N/A
Protected

Academic year: 2021

Partager "Range dependent sediment sound speed profile measurements using the image source method"

Copied!
11
0
0

Texte intégral

Loading

Figure

FIG. 2. Example of a recorded signal of the first hydrophone of the array.
FIG. 4. Refracted ray in a medium with known layer sound speeds and thicknesses.
FIG. 5. Sketch of the variables used.
FIG. 6. (Color online) Image sources map computed with hydrophones 18 to 32 for: (a) I M (in dB), (b) I semb
+6

Références

Documents relatifs

As neurally adjusted ventilatory assist (NAVA) [ 12 ] uses a neural signal (the diaphragm electrical activity, or EAdi, independent from airway pressure and flow signals), to

Three sub-critical (SC) core configurations were investigated in the VENUS-F zero power reactor coupled with the GENEPI-3C accelerator1. The SC10 and SC12 were a mock-up of a

on Which said scene is mapped in accordance With a ?rst projection associated With said ?rst point of sight, Wherein each source pixel has a point in said scene

The propagation channel typically encountered in the urban environment between a terrestrial emitter and a receiver is usually modeled by several taps whose

The calculated strength measurements, based on brine volume rather than total porosity, were shown to be very dependent on the temperature measurement, and not significantly

The objective of the 6D Program is to ensure that Intel's Fabs use safe, effective procedures and business processes to transfer assets from the factory to its

In order to study the sound propagation inside a forest using the TLM method, it has first been necessary to evaluate the ability of the numerical model to simulate single and

The extremely high charge/discharge rates applied to the LFP up to 1 V s –1 enabled by a cavity microelectrode allows focusing on the intrinsic kinetic properties of the material on