• Aucun résultat trouvé

Dynamic delamination modeling using cohesive finite elements

N/A
N/A
Protected

Academic year: 2021

Partager "Dynamic delamination modeling using cohesive finite elements"

Copied!
8
0
0

Texte intégral

Figure

Figure 2. Mode I testing and opened sample.
Figure 4. Comparison of (a) DCB experiments and simulation, (b) ENF experiment and simulations
Figure 8. Delamination delimited by bands of elements which damage parameter is in [0.9; 1[ at 2.5 ms
Figure 11. History of maximal stresses for mode II (A & B labels) and mode I (C label) in [-45/45] coh-1  bottom cohesive interface and [90/0] coh-3 cohesive interface

Références

Documents relatifs

Later, in order to study the border between solvable and unsolvable tasks in presence of asynchrony and failures, Chaudhuri [6] introduced a natural general- ization of

Plus tard dans l’entretien, elle mobilise ce qu’elle sait de cet élève pour expliquer ses réactions “c’est un enfant qui est intelligent, (...) qui ne trouve pas

La question qui se pose ensuite est : quels sont les risques et incertitudes pour le fonctionnement futur des écosystèmes et le changement climatique (global

By using the isogeometric concept in which the NURBS representation of the composite laminates is maintained in a finite element environment, it was shown by several examples that

Keywords: Cohesive zone model, digital image correlation, finite element model updating, wedge splitting test, castable

This classical model has one big (dis)advantage when compared to the real parallel machines available nowadays: to ensure an exponential improvement in running time compared to

Enfin, comme les envois d’argent par les familles aux forçats sont systématiquement reportés sur leur pécule, il arrive fréquemment que certains d’entre eux usent de

Avec l’hypothèse d’homogénéité du matériau, la propagation de l'onde ultrasonore n’est pas perturbée par la microstructure du composite grâce au choix