• Aucun résultat trouvé

Humid Ageing of Organic Matrix Composites

N/A
N/A
Protected

Academic year: 2021

Partager "Humid Ageing of Organic Matrix Composites"

Copied!
69
0
0

Texte intégral

Loading

Figure

Fig. 1 Shape of main sorption isotherms for homogeneous, bulky polymer samples
Table 1 Coefficients of the empirical power law linking the equilibrium mass uptake to relative hygrometry for the resin NARMCO 5208 and its carbon fiber laminates
Fig. 4 Hydrogen bond potential for three cases of distribution of distances between polar groups
Fig. 5 Molar increments of water absorption against water activity for four chemical groups: alcohols (triangles), acids (crosses), esters (lozenges) and ethers (squares) according to Van Krevelen and Te Nijenhuis [28]
+7

Références

Documents relatifs

The test results of loading carried out on cylindrical concrete specimens, confined by alveolus composite grids arranged inside the section, show that it is possible to

However, for busbars with small magnetic fields, it is possible to obtain substantial decrements in total power consumption (ohmic dissipation and cryogenic cooling

Hence, research areas such as micropropagation, genetic transformation and molecular genetics were developed for respectively producing clones on their own root part, studying

The key features for accurate neutron measurements at the n TOF facility with its two beam lines and experimental areas EAR1 and EAR2 are a large energy range, high

Taking these individual TAC solutions, the TCC has com- puted a first combination using two independent combina- tion software packages: Combination and Analysis of Ter-

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Objective: This study tested the hypothesis that time spent on activities that are considered regenerative (e.g., resting), productive (e.g., housework), and con- sumptive

The effects of heat storage in materials must be recognized, as must the fact that wall or roof surface temperatures can be higher than air temperature