Predictive maintenance policy for a gradually deteriorating system subject to stress
Texte intégral
Figure
Documents relatifs
function f (thin line); n=10 evaluations (squares) as obtained by the proposed algorithm using m = 800 for the Monte Carlo integration and Q = 20 for the tagged partition;
The tool works as follows: it computes the first date using a given MTBF and the number of nodes (obtained from the XML description file), then it randomly chooses a node to which
We report the value of the delay budget in the best and worst case; these two values do not coincide in case of cascading approaches: the best case is the one in which only
one outlier (case 11) where the difference can be explained by a higher RMSE for the fitting procedure (due to a more scattered wake center evolution). No significant difference
It has been particularly shown that the average probability of system failure to perform its safety function on demand (PFDavg) can be reduced, just by a
Thus, to experiment failure detection at global level, we need to use correlated failures in order to induce the crash of whole local groups. We emulate the failure of sites
Thus, to experiment failure detection at global level, we need to use correlated failures in order to induce the crash of whole local groups. We emulate the failure of sites
Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials2. Kostas Danas, Pedro